Lo Que Hacemos
Nuestras Soluciones
Servicios integrales de calidad de energía de la medición a la mitigación.
Harmonics are electrical distortions caused by non-linear loads such as variable frequency drives, UPS systems, and LED lighting. Left unmitigated, they increase energy losses, overheat transformers, and can trigger utility penalties. We design and install the optimal mitigation equipment for your facility.
CAPACITOR BANK
Power Factor Correction
Capacitor banks are the most common solution for power factor correction. They provide reactive power compensation to optimize energy consumption and avoid utility penalties for low power factor.
Main Features
- Power factor improvement to 0.95 or higher
- Reduced demand charges and energy costs
- Automatic switching based on load requirements
- Protection against overvoltage and overcurrent
- Compliance with utility power factor requirements
PASSIVE HARMONIC FILTERS
Economical Harmonic Mitigation
Passive harmonic filters are the more economical solution and can be used in a variety of capacities and voltages. These filters utilize components like inductors, capacitors and resistors to reduce, or mitigate, harmonics to tolerable levels as defined by IEEE 519.
Main Features
- Industry standard for 6-pulse rectifier and motor drives
- Filters for diode rectifier without DC-link choke
- Best-in-class partial load performance
- Most compact design with low footprint
- Plug and play, ready to use installation
Tuned to mitigate the specific harmonic of interest
ACTIVE HARMONIC FILTERS
Dynamic Harmonic Correction
Active filters are the more permanent flexible solution. These filters actively monitor the system and use a set of transistors and capacitors to filter the current waveform by injecting inverse currents to cancel out the undesired harmonic components.
Main Features
- Compact active filter for 3-phase loads with and without neutral
- <5% THDi achievable even on complex mixed loads
- Intelligent system approach offering tailored solutions
- Extended temperature range of modules up to 50°C
- Ultra-fast and dynamic reactive power compensation
- Load balancing and unloading of neutral wires
- Compliance with IEEE 519, EN 61000-3-12 standards
Frequency Sweep Analysis included with every solution design to prevent electrical resonance and ensure optimal performance.